CARC Coatings

Image
 
Type I CARC coatings are two component waterborne polyurethane chemical agent resistant coatings (CARC) for military equipment. Meets the performance and composition of the MIL-DTL-64159 Type I specification.

Key Features:
Low odor
Reduces with water, means considerable cost savings in solvent
Smooth finish versus standard CARC

Type II CARC coatings are two component waterborne polyurethane chemical agent resistant coatings (CARC) for military equipment. Meets the performance and composition of the MIL-DTL-64159 Type II specification.

Key Features:
Low odor – improves working conditions
Excellent exterior durability
Reduces with water, means considerable cost savings in solvent

Rust Inhibiting and Lacquer Resistant Primer is a quick drying, high solids corrosion inhibiting, alkyd primer designed for use on ferrous and non-ferrous metals. The primer is lead and chromate free and contains no more than 3.5 pounds per gallon of volatile organic compounds as applied.
Key Features
Rapid air dry.
Excellent water and hydrocarbon resistance.
Rust Inhibiting and Lacquer Resistant Primer
Low emissions.
lead and chromate free, epoxy primer It meets MIL-P-53022B, Type I composition and performance specification. It may be used as the primer under MIL-PRF-85285D (non-aircraft) polyurethane topcoats, or polyurethane chemical agent resistant coatings (CARC) specified in MIL-DTL-53039B, MIL-DTL-64159 or MIL-PRF-22750F epoxy topcoats.
Key Features
Lead and Chromate Free Epoxy Primer
Excellent chemical, solvent, and corrosion resistance on ferrious and nonferrous metals.
Fast drying.
Free of lead and chromate hazards.
pretreatment, two package, acid catalyzed vinyl wash primer used for clean metal surfaces. It is used to enhance adhesion of the coating system and conforms to Military Specification DOD-P-15328D.

Key Features:
Fast drying
Increases adhesion of topcoat
Conforms to Navy Formula 117
Metal Wash Primer

Water Reducible is a waterborne alkyd-amino enamel designed for general metal finishing. It provides a hard, tough coating at 2.3 lb/gal VOC without the hazards of flammable solvents.
Key Features
Excellent flow and leveling.
Excellent flexibility and toughness.
Reduces with water, means considerable cost savings in solvent.
Ideal for use on a wide range of metal products for both interior and exterior application.